In-channel Ventvisor 2pc
Select Your Vehicle to
view products
Product Overview
Customer Reviews
Installation Guide
Keeps rain out, lets fresh air in
Installs in window channel for sleek appearance
Reduces heat build up in parked vehicles by allowing window to be kept partially open
Custom fit for your vehicle
Average of 36 customer reviews
Login to add your Review
Oh well well!!! Nothing I can't say, after watch the movie instruction and combine manual instruction from product. That perfect fit on the both side of my truck, nice, neat. Color is matching my truck's color also, make my eye sight is cool when looking from inside out. Thank you so much.
Excellent overall product, very easy to install. A little to early to rate the quality as I have only had them on a few weeks. Wish they made the in-channel in Camo Patterns for those of us who like to go "redneck" Average for cost.
Part #192607 2004 Dodge Ram 3500. Installation was a breeze. The in channel design gives the install a much cleaner look BUT... Over time they will scratch the outside edge of the window glass where they come in contact with the vent shade.These should have a felt lining to protect the glass from repeated rollups and downs.. I have had the external stick on ones and they do the job, but the in channel ones look much better, giving the truck a much smoother look. Would've given them a 5 star rating but took one star off for each scratched window edge.. Still a very nice product, just needs the added protection of a felt lining.
They look cool, but, the driver side visor was improperly molded when it was made. I had to call AVS company and get a new set mailed to me.
My other truck I bought, the window guards that mount outside the channel. I hated them the new ones in the channel I really dont think I have to worry about them falling off.
These are great looking VentVisors; they make my Tacoma look Hot. But they really make it feel cool, since I can leave the windows slightly open when driving or under the hot sun.
The installation instructions were unclear. As a result, I installed the rear vent visors with the end tabs in the channel. This prevented the window from rolling up. The manufacturer emailed photos which clearly showed my error AND sent me a new set. I recommended they improve the instruction sheet. The vent visors look good and work well when done right.
Completely happy with this product. But the best part is their customer service.......it is the best. Will use them again as needed.
It works. Looks good. Install was in 20 degree temps and it is still sticking..
This is the second vehicle I've owned with this product. Very good product for the value. Problems with the install, keeping the in channel clips (that hold the front and back edges) in place.
Installed as advertised. Excellent quality for price. Looks good on truck. I'm pleased.
I absolutely love my new AVS In-channel Ventvisor, they were easy to install and look great on my truck.
AVS In-Channel Ventvisor's look great installed,very clean looking.Installation very simple following instructions.. Highly recommended..
These are great, especially when it's raining. The only downside was that it came with a minor scratch and the edges are rough. Even with those flaws they were still worth the money!
Great customer service. Fast shipping , cheapest price out there. Thank you so much the ventvisor is beautiful on the car.
Easy to install Looks great Works great I like to drive with the window slight down rather than turning on the AC especially early in the morning, late afternoon, or at night. The Ventvisor does a great job at keeping water out. Used it for about a month now. Still holds tight and going strong.
Work great. Nice to have the window down a bit and not have snow or rain coming in the window. Very easy to install and fit was excellent. Took about 15 minutes.
I'm very happy with these vent visors. Installation was very easy and they look great.
Just installed it and all is well. This is 1st time that I'm using an in-channel product. Initially both windows could not be closed without help since it got stuck on the ventvisor. However, kept the windows closed for 3 days and stuck a shimmy between the window glass and ventvisor at rear end of the ventvisor. This worked on both sides and no problem with opening and closing the window now.
First of all the product promptly arrived in 3 days....great service. Super easy to install, the fit was loose enough to do a test fit just to be exactly sure of where I wanted to place it, once sure, peel the tape and put it in place. Keep the windows shut for 24 hours and your good to go! Looks great and really cuts down on wind turbulence.
The AVS ventvisor added the look i wanted to my 2010 Tacoma. I highly recommend the in-channel style of the AVS vent visor. The in-channel looks are far superior to the styles that stick to the outside of the door. The in-channel version is easy to install and can be completed within minutes.
Ive bought lund before because they work well with my truck. I bought these in channel ones for my 2010 coupe civic and there not staying in properly. The drivers side is not matching up with the little plastic peice that juts out on the top of the door frame, but the passenger one did fine. My windows arent rolling up properly. Could be my instalation or faulty pieces but I wouldnt hesitate fixing a small problem because my truck gaurds are doing great.
Mike- Thanks for taking time out of your day to review the In-Channel AVS VentVisor. We couldn't agree more that the install is easier than it appears. This is why we are releasing a series of installation videos in November to address any common installation concerns, and to simplify the process. These videos will be starring our Product Technician, Matt Black. Look for them on this website and on YouTube. Dan Callender E-Commerce Director.
directions are very poor to say the least once figured out very simple to install. directions state to roll back the window channel to install clips. not at all what you have to do. just simply insert them half way of the visor in to the window track. its real simple but directions are not!!!!!
I am much more comfortable with the in channel instead of the outside visors because they align themselves. Very easy to install. Take 2 minutes to read instructions as they are actually written in English and make sense.
Over all a quality product had the glue on the door widow visors on my 94 F250 and they work well and look good. However I bought the in the channel visors for my 2004 Ranger and they where easier to install plus if one where to break I believe these would be easier to replace.
I bought this for my 2007 Silverado "Classic body" but the discription was rather vague as to wether it was for the classic or new body style. When it arrived the package said for 'New body style", I contacted customer service and I now have everything in process to get the right vent visor for my truck. Can't say enough about the excellent service that I received from customer service getting things straightened out.
I've installed this product on at least five vehicles.....A '96 Sonoma, a 2000 F-150, a 2002 Nissan Frontier Crew Cab, a 2003 Ford Escape, a 2006 Mustang GT and have recently ordered a set for my '07 F-150 Super Crew. I have never had a problem...following the instructions and utilizing a little bit of patience will prevent any breakage or fit issues. I immediately install these on any vehicle that I purchase and I always buy from jcw.com for the best price going!!!!
If you think this content is inappropriate, please click 'Report as Inappropriate' below. The Lund International team will take action as needed. Thanks for helping make our web site a better place!
‹ Previous page 1 of 13
Next ›
PDF Installation Guide: Download Installation Guide
Need more assistance? Contact Product Support or give us a call at 1-888-588-6049.
